WUPP ZH-983F2 Waterproof Motorcycle 22mm Electric Heated Grips Hand Warmers – 32.82 – Discount
WUPP ZH-983F2 Waterproof 12V Universal Motorcycle 22mm Electric Hot Heated Grips Motorbike Hand Warmers Adjust Temperature Handlebar
1. One-piece molding to prevent rain and dust from entering the internal parts to corrode the parts, and the service life is longer and safer.
2. Built-in intelligent temperature control chip, three-speed adjustable temperature, safer. It is made of aluminum alloy, which is more durable and beautiful in appearance.
3. The design can be sealed and can be pierced. It does not affect the installation of the handle outside the handle, and only the lights and other decorative accessories are installed, which is more convenient.
Product name: Intelligent three-speed ATV thermostat electric heating handle
Product model: ZH-983F2
Product color: Black
Product material: Nitrile
Product net weight: 252g
Product gross weight: 305g
Packing size: 20.5*13.5*6cm
Packing method: Carton
Suitable for handlebar diameter: 22mm
Input voltage: DC12V
Product power: Red light 35W, blue light 25W, green light 17W
Handle temperature: Low temperature 40°C, medium temperature 50°C, high temperature 60°C
Handle type: Sealable and openable electric handle
Switch type: Multi-stage adjustable temperature control switch
Applicable models: 12V ATV (ATV) with a handlebar diameter of 22mm
1. Power on: the red light/blue light/green light flashes once and then goes out.
2. Working status: indicator light is always on (high-end: red light is always on, mid-range: blue light is always on, low-end, green light is always on).
3. Long press the power button for 3 seconds: shut down.
4. Click the power button: switch gears.
How to use the switch:
Press and hold for 3 seconds to turn on, the red breathing light will turn on, when it reaches a certain temperature, it will automatically turn blue; press lightly to change to blue light, the temperature is medium temperature; press twice to change to green, the temperature is the lowest; press three times to Red, high temperature. Long press for 3 seconds to turn off.
1. Remove the original handlebar.
2. The inner hole of the left handle is moistened with soapy water, and the twisting amplitude should not be too large during installation.
3. The power cord, the red wire is connected to the positive pole, and the black wire is connected to the negative pole, please confirm and then connect it, do not reverse the connection.
When installing the left handle, do not twist the handle too much. Excessive twisting will cause the heating wire to shift.
When wiring, connect red to the positive pole and black to the negative pole.
If it is connected reversely, the switch will burn, but the handle will heat up, so when wiring, please make sure to connect the positive and negative terminals to prevent burning.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.Package Content:1set X Electric Heating Handle